topleft
topright

iPod Dock Connector Pinout

The iPod dock connector allows a variety of accessories to be connected with the iPod which can offer enhanced functionality. The connector connector uses 30 pins; the function of each pin is given below.

Pin Function Description
1 GND Common to pin 2.
2 GND Audio/Video ground.
3 Audio Out R Line out right channel.
4 Audio Out L Line out left channel.
5 Audio In R Line in right channel.
6 Audio In L Line in left channel.
7 - -
8 Video Out Composite video out.
9 S-Video Cro (IPOD color / photo) Chrominance
10 S-Video Lum (IPOD color / photo) Luminance
11 GND Serial ground.
12 Tx Serial Tx
13 Rx Serial Rx
14 RSV Reserved pin.
15 GND Common to pin 16.
16 GND USB ground.
17 RSV Reserved pin.
18 3.3V +3.3V accessory supply. Stepped up to 5V on camera connector.
19-20 12V FireWire +12V supply.
21 Accessory Connect to ground via resistor to indicate the presence of an accessory. Different resistance values assigned to each accessory.
22 FireWire TPA - FireWire Data
23 5V USB +5V supply.
24 FireWire TPA + FireWire Data
25 D- USB D-
26 FireWire TPB - FireWire Data
27 D+ USB D+
28 FireWire TPB + FireWire Data
29-30 GND FireWire ground.

Note: Your connector may be reversed, so always check before connecting anything! Damage may be caused to your hardware if you connect the iPod incorrectly.

No Comments

Add your own comment...

You must be registered to leave a comment.

wEmbed-prtnr_rgbISO9001.png

Related Items

(c) 2006-2009 All Rights Reserved. Practical Control Ltd. Electronics Design, Product Design, Embedded Software